It is a fitting which is bent in such a way to produce 90-degree change in the direction of flow in the pipe. It used to change the direction in piping and is also sometimes called a “quarter bend”. 90-degree elbow attaches readily to, M.s. steel and G.i.
STEEL TUBE BEND/M.S.PIPE BEND
DESCRIPTION
It is a fitting which is bent in such a way to produce 90-degree change in the direction of flow in the pipe. It used to change the direction in piping and is also sometimes called a “quarter bend”. 90-degree elbow attaches readily to, M.s. steel and G.i.
STEEL TUBE BEND/M.S.PIPE BEND
DESCRIPTION
It is a fitting which is bent in such a way to produce 90-degree change in the direction of flow in the pipe. It used to change the direction in piping and is also sometimes called a “quarter bend”. 90-degree elbow attaches readily to, M.s. steel and G.i.
STEEL TUBE BEND/M.S.PIPE BEND
DESCRIPTION
It is a fitting which is bent in such a way to produce 90-degree change in the direction of flow in the pipe. It used to change the direction in piping and is also sometimes called a “quarter bend”. 90-degree elbow attaches readily to, M.s. steel and G.i.
C.I. CHECK VALVE
DESCRIPTION
Simply put, a check valve allows flow in one direction and automatically prevents back flow (reverse flow) when fluid in the line reverses direction. They are one of the few self-automated valves that do not require assistance to open and close.
C.I. CHECK VALVE
DESCRIPTION
Simply put, a check valve allows flow in one direction and automatically prevents back flow (reverse flow) when fluid in the line reverses direction. They are one of the few self-automated valves that do not require assistance to open and close.
C.I. ADAPTER
DESCRIPTION
We perfect range of Submersible Pump Adapter to our One end of Submersible Pump Adapter is connected with the one end of submersible and another end is connected with the pipe used to discharge the water from well.
C.I. COUPLAR
DESCRIPTION
C.I. Flexible Couplings are used to join two spigot ends in a pipeline. It has multiple uses - joins pipes, reverses direction of `pipeline, bridges gap in a pipeline. Theses C.I.
C.I. FLANGE
DESCRIPTION
A flange is a method of connecting pipes, valves, pumps and other equipment to form a piping system. It also provides easy access for cleaning, inspection or modification. Flanges are usually welded or screwed. Flanged joints are made by bolting together two flanges with a gasket between them to provide a seal.
C.I. NIPPLE FLANGE
DESCRIPTION
A flange is a method of connecting pipes, valves, pumps and other equipment to form a piping system. It also provides easy access for cleaning, inspection or modification. Flanges are usually welded or screwed. Flanged joints are made by bolting together two flanges with a gasket between them to provide a seal.
C.I. NIPPLE/NOZZLE
DESCRIPTION
Casting Nozzles are designed to look after the characteristics or direction of a fluid flow. At times these are available in form of a pipe or tube which are used to direct the flow of a fluid. Different types of sizes are available for different purposes, etc.
RUBBER FLANGE WASHER
DESCRIPTION
To maintain gasket pressure by compensating for gasket relaxation, bolt creep, and differential expansion during temperature/pressure changes. Flange washers maintain the high loads necessary to keep flange joints tight and leak free. Flange rubber washer prevents damage to bolts and gaskets.
PVC NOZZLE CHECK VALVE
DESCRIPTION
Simply put, a check valve allows flow in one direction and automatically prevents back flow (reverse flow) when fluid in the line reverses direction. They are one of the few self-automated valves that do not require assistance to open and close.
PVC CHECK VALVE
DESCRIPTION
Simply put, a check valve allows flow in one direction and automatically prevents back flow (reverse flow) when fluid in the line reverses direction. They are one of the few self-automated valves that do not require assistance to open and close.
C.I. PUMP PULLY
DESCRIPTION
A "Belt Drive" pump has a pulley mounted to its solid shaft and is driven by one or more belts that are attached to a pulley on the motor or engine. The pulley system allows these pumps to turn at a much lower RPM than a direct drive pump (typically 900-1400 RPM).
C.I. REFLEX VALAVE/NON-RETURN VALVE
DESCRIPTION
The function of non-return valve is to limit the flow of fluid through it one direction. They may be manually operated or may be automatic operated. Automatic valves are designed for particular pressure, when pressure (of fluid) exceeds that limit, valve opens allowing the fluid to flow through it.
HOSE CLAMP
DESCRIPTION
A hose clamp's design allows it to secure a hose over a fitting, thereby preventing any fluid flowing through the hose from leaking at the connection. Common uses for hose clamps include securing hoses in automotive systems and for clamping lines in household plumbing systems.
M.S./G.I. SHOKIT
DESCRIPTION
A Socket Weld is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. In contrast to buttweld fittings, Socket Weld fittings are mainly used for small pipe diameters (Small Bore Piping); generally, for piping whose nominal diameter is NPS 2 or smaller Available Size 25 MM TO 150 MM.
Pvc Foot Valves
DESCRIPTION
Pvc Foot Valves are available in different models such as Nut-Bolt, small springs. Color availabilities are: Blue, Black and Green.
Trolley Wheels
DESCRIPTION
Trolley Wheels
V Belt Pully
DESCRIPTION
A "Belt Drive" pump has a pulley mounted to its solid shaft and is driven by one or more belts that are attached to a pulley on the motor or engine. The pulley system allows these pumps to turn at a much lower RPM than a direct drive pump (typically 900-1400 RPM).